AUTONET TV

Straight to the Point (Alignment Signs of Problems)

It’s just common sense that your vehicle will drive better if all the wheels are lined up with each other and the road the way the engineers intended.  When they’re not, that is called being out of alignment.   Here are some signs that your alignment has problems.

• Your steering wheel isn’t straight when your vehicle goes straight down a straight road. This one’s pretty easy to notice.  If your vehicle’s logo on the wheel is tilted, that’s probably not the way designers wanted it to be. Bring it in and have us check it out.
• Your steering wheel is vibrating on a smooth road or when you are accelerating.  While this could be caused by several different things, one possibility is misalignment.  If your steering wheel is shaking, it should be examined by a trained technician.
• Your vehicle is pulling to one side without you wanting it to.  Sometimes the configuration of the road will cause it to pull slightly left or right.  But if you find yourself constantly correcting course to keep your vehicle headed straight down the road, that’s worth having us look at your alignment.
• You’re going through tires like there’s no tomorrow. The tread on your tires should be wearing nice and evenly from the outside to the inside of the tire.  If the wear isn’t even, it could be your vehicle needs an alignment.

We have equipment designed to quickly and accurately measure your vehicle’s alignment.  We can make precise adjustments to make sure you are headed straight where you want to go.  Have your alignment checked regularly. It can help prevent more serious problems in the future and make your vehicle drive as beautifully as you remember it used to.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Read a Good Tire Lately? (Tire Wear)

There's lots of good information to read in books and online.  You might not know that you can also "read" your tires and learn a lot about what shape they're in and if they are in need of attention. It's important to know how your tires are doing because a tire failure can be very dangerous to you, your passengers and others on the road near you.

You read your tire by looking at the surface that rides on the road, where the tread is.  Check out the outer and inner edges.  If you notice there's more wear on the inner or outer edge than on the rest of the tread, your vehicle could be out of alignment.  Wear on an inner or outer edge could mean your wheels are leaning too much to one side.  When you see this, visit our service center soon to have the alignment checked.

What about if both edges are worn? That could be a sign that you don't have enough air in that tire.  In an underinflated tire, the middle is not contacting the road surface as much as the edges, so the edges wear down first.  It could also mean that you're taking corners too aggressively or your tires haven't been rotated on a regular schedule.

Another thing you might see on your tires' tread area is wear in the center of the tire.  That means you likely have too much air in that tire.  Too much air makes your tire contact the road in the middle more than on the edges so the middle wears down prematurely. 

You might also see some smooth spots on the tread in irregular spots. This is called cupping. This is sometimes caused by suspension problems. A technician can examine your suspension to see if it is up to the manufacturer's specifications.

Finally, you may spot tires that are worn unevenly in a pattern that goes diagonal to the tread pattern.  This could mean your tires are out of balance, something our service center can check. They might also check alignment at the same time.

Your tires are the only part of your vehicle that contacts the road surface.  That means your acceleration, traction, steering and braking are all dependent on your tires being healthy. Maintain your tires by having one of our trained technicians read the clues and making sure they're always in roadworthy shape. 

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

A Clean Sweep (Fuel Injector Cleaning)

Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite.  It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine.

But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to.  They can also shoot contaminants into the engine. 

One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to.

If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance.  When you bring your vehicle to us, we will connect the flushing equipment, flush out the injectors and reassemble the system.

A good time to have fuel injectors inspected is when you bring your vehicle in for routine maintenance.  An oil change is an ideal time to have a technician take a close look at your entire fuel delivery system. 

When you have your fuel injectors cleaned, you may see your mileage go up, your engine performance improve, and your exhaust emissions decrease.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Round and Round (Wheel Balancing)

In a perfect world, all wheels and tires would be perfectly round and weigh exactly the same at every point of the wheel.  Unfortunately, they're not, and if they're out of balance, they can reduce the lifespan of your tires, make your vehicle shake like a carnival ride, and maybe even damage a few suspension parts along the way.  You don't want that!

Wheel balancing, sometimes known as tire balancing, is a process by which a technician makes sure your tire/wheel assembly has evenly distributed weight.  If it isn't, it can give your ride bad vibrations.  If you feel your vehicle's steering wheel shaking, it can mean unbalanced wheels in the front. If you can feel a vibration in your seats, it could be unbalanced rear wheels.

In addition to your vehicle vibrating at higher speeds, there are other signs that your wheels are out of balance. You may see uneven tread wear, or you may notice you aren't getting the kind of fuel economy you used to. 

When you experience these problems, bring your vehicle in, and we can put your wheels on a machine designed to detect any imbalance.  The technician will start your wheels spinning, and a computer will determine how much weight is needed where.  Then, the technician can add small weights on the inside or outside of your wheel rim to precisely balance out the uneven weight.  When the wheel is balanced correctly, it will spin evenly and smoothly.

Sometimes your vehicle will hit a pothole or object in the road that dislodges one of those weights, which can throw that wheel out of balance again.  If so, you'll have to bring it in to have that corrected

Some drivers confuse wheel balancing with wheel alignment. Alignment is making sure the wheels are perpendicular to the road and parallel with each other.  Sometimes your vehicle will need both balancing and alignment done at the same time.

No vibrations are good vibrations when it comes to your wheels.  Bring your vehicle to us, and we'll perform a balancing act to keep your vehicle riding smoothly down the road.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Sounds Exhausting! (Exhaust Service)

Most of us know a bad muffler when we hear it.  That loud, rumbling sound is unmistakable. Did you also know you can get a ticket for driving around with a loud exhaust system?

If your exhaust system has a leak in it, it may be allowing poisonous gases inside your vehicle and could make you seriously ill (or even kill you!) if you breathe too much in.

Unfortunately, your exhaust system faces a lot of destructive forces out on the road.  Rust is the worst, and not just in colder climates where they use salt and brine as de-icers.  Exhaust systems can rust from the inside out when moisture condenses inside the pipes.  Vibrations and jolts from rough roads (and the occasional run in with a rock or a curb) can wreak havoc with exhaust systems.  Even a bad oxygen sensor can send too much fuel into the catalytic converter, and the resulting heat can wind up destroying this very expensive component.

Your exhaust system is made up of several parts, and all need to be in good shape in order for you to be sure that the gases created by your engine's combustion get properly moved out and away from the vehicle. The good news is that many newer exhaust systems are made out of more durable materials like stainless steel.  But all exhaust systems are subjected to some of the roughest elements streets can dish out. So it's a good idea to have your exhaust system periodically inspected and serviced.

There are a lot of parts to keep track of in an exhaust system, including the muffler, manifold, catalytic convertor, oxygen sensors and the muffler (or maybe your vehicle has more than one).  We strongly recommend having your exhaust system periodically checked so we can catch a problem before it turns into something major… and maybe dangerous.  We can recommend repair or replacement that suits your driving habits and budget. 

Oh, and remember one final benefit to a tip-top-shape exhaust system.  Your vehicle will dump far less pollution into the atmosphere if it's working the way engineers designed it.  We'll all breathe a little easier when our exhaust systems are doing their job right.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903