AUTONET TV

Is Your Idaho Falls Driving Severe?

People near Idaho Falls, ID, often ask All Things Automotive & Diesel Service how often they should have a particular service done. It's a great thing to ask. You can look at your owner's manual or have your Idaho Falls, ID, service advisor at All Things Automotive & Diesel Service look up your vehicle in a service database. What you find is often a surprise to people – there are actually two service schedules.

One is the regular schedule and the other is the severe service schedule. Service intervals are shorter on the severe service schedule. When asked, most folks in Idaho Falls will say that their driving is normal and that the 'regular' schedule probably applies to them. 'Severe service' sounds pretty extreme – 'I don't drive like that.'

Well, here is what the manufacturers say constitutes severe driving conditions; you can draw your own conclusions.

• Most of your trips are less than four miles (six and a half kilometers).
• Most of your trips are less than ten miles (16 km) and outside temperatures are below freezing.
• The engine is at low speed most of the time – not on the highway. You operate your vehicle in dusty areas.
• You regularly tow a trailer or carry heavy loads.
• You drive with a car-top carrier.
• You do a lot of stop-and-go driving.
• You drive in very hot or very cold weather.

If that's severe driving, what constitutes regular driving? Well, it would look something like this: I live somewhere with moderate temperatures all year round – I'm thinking San Diego here. And I live close to a freeway on-ramp. Everywhere I need to go is right off the freeway, at least four miles (six and a half km) from my home. I can drive at a steady 60 miles per hour (100 kph) when I'm on the freeway.

I don't know about you, but that doesn't sound like my normal driving. It sounds more like ideal conditions. I live where it gets hot in the summer and cold in the winter. I run short errands around Idaho Falls. Occasionally we load up for family trips.

For me, normal driving includes elements of severe service driving. So here's what I tell people: think about how you drive, where you live, where you go and what you are expecting to with your vehicle in the near future.

Picture a line with 'regular' on one end and 'severe' on the other, and make a judgment on where you fall. If your regular oil change recommendation is 5,000 miles (8,000 km) and the severe service recommendation is 3,000 miles (5,000 km), when should you change your oil? For me, it's closer to 3,000 miles (5,000 km). For my wife, it's closer to 5,000 miles (8,000 km). Your Idaho Falls, ID, auto service advisor at All Things Automotive & Diesel Service will be happy to have this discussion with you and help you sort it out.

Just a quick word on why severe service intervals are shorter. One has to do with heat. That can either be external heat from the weather, engine and transmission heat from stop-and-go driving or working extra hard moving heavy loads or towing. The heat causes the fluids like oil and transmission fluid to break down more quickly, and then they aren't as effective.

Another factor is water. Moisture naturally collects in fluids as they cool. In your motor oil, for example, if you don't drive long enough for the oil to fully heat up, the water won't evaporate. Water in the oil can lead to the buildup of damaging sludge.

If you live where the air is dusty or polluted, fluids will become contaminated and filters will get dirtier more quickly.

So make an honest evaluation of your driving conditions. You've made the commitment to take care of your vehicles, so it only makes sense to follow the right schedule.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Recommended Service Intervals at All Things Automotive & Diesel Service

Most people in the Idaho Falls area are aware that automotive manufacturers have recommended service intervals. Following recommended service intervals is very important. The engineers that design our vehicles have tested the various systems and components to meet durability and safety standards. Some of these standards are self-imposed and others, like those for emissions components, are government mandated for areas in ID.

The maintenance schedules are designed to achieve the standards. Think of the benefits of following recommended intervals as falling into three general categories: Protection, Efficiency and Safety.

Protection. Let's start with motor oil. First of all, the engineers recommend a particular weight and type of motor oil for your vehicle. All of their oil change recommendations assume using the proper motor oil. Motor oil contains detergents and other additives that clean the engine and provide corrosion resistance. Over time, the additives are depleted. The oil also becomes contaminated by water, dirt and combustion gases.

Extending your interval beyond the recommendation means that your vehicle engine will be operating without the full protection of fresh motor oil. It also means that sludge can form in contaminated oil and clog up passages in the engine, starving parts from needed lubrication.

Efficiency. Some services are designed to keep automotive systems operating efficiently. For example, the fuel system gets clogged up with gum and varnish from the fuel. Fuel doesn't flow efficiently which reduces fuel economy. A fuel system cleaning restores the fuel system's efficiency and increases your gas mileage.

Safety. Your brakes are a component of one of the most important safety systems on your vehicle. The manufacturer has scheduled brake pad replacement as well as power brake fluid drain and replacement intervals. Because brakes are so important, a brake inspection is also on the schedule to head off problems before they result in an accident.

Check your owner's manual for recommended service schedules or talk with your Idaho Falls service advisor at All Things Automotive & Diesel Service by calling 208-523-3903.

You may be surprised to learn that various inspections may be on your list of factory recommendations for your vehicle. These inspections are usually at major intervals like 15,000 or 30,000 miles/24,000 or 48,000 km. They're designed to uncover important parts that may be close to failing.

Your vehicle owner's manual can tell you when to change your oil, but it can't tell you that you have a radiator hose that's bulging and about to burst. For that you need a trained auto technician. These scheduled inspections are in addition to the multi-point inspections done with a full-service oil change.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Saving Lives in Idaho Falls with Tire Pressure

All new passenger vehicles on our Idaho Falls, ID, roads now have tire pressure monitoring systems – TPMS for short. They are designed to alert you if your tires are underinflated. Since they are fairly new, a lot of people have questions about them.

First off, the most important thing is that you still need to check your tire pressure every week – or at least every time you gas up. The TPMS system alert comes in when your tire is 20 percent below the factory recommendation. So if the recommended pressure is 34 pounds per square inch, the TPMS warning won't come on until the pressure is at 28 pounds. That's significantly underinflated, enough to raise safety concerns.

The worst is tire failure. A severely underinflated tire can overheat and fail. Also, handling degrades to the point that you may not be able to steer out of trouble. Also underinflated tires wear out faster and they waste fuel. So it's costly to not stay on top of proper inflation.

What's the practical value of the TPMS system? Well, it's twofold. First, it can alert you when your tire is losing pressure due to a puncture or a bent rim. That's an important warning that you might not have gotten until next time you gassed up.

The second is that we all occasionally forget to check our tire pressure. So it's a fail-safe system to let you know there's a problem brewing.

Other things can cause your TPMS system to go off. The system also monitors itself. The sensors that are mounted in the wheels have little batteries that send a signal to the monitor. The batteries go dead over time and the TPMS system will let you know. And the sensors could break. Also road salt from our ID roads can ruin them.

There's also a hassle factor that your Idaho Falls, ID, tire center has to contend with. For example, when you have your tires rotated in Idaho Falls, the TPMS system has to be re-calibrated so that it knows which tire is on which corner of the car. Same is true for when you have new tires or winter tires installed. Flat repairs, as well.

That takes extra time. And it requires the right equipment and training. Special – and expensive – tire change machines need to be used with some sensors. It's all complicated by the fact that there are a number of different TPMS systems in use so the tire professionals at All Things Automotive & Diesel Service need equipment and training for each kind. Tire centers have had to raise the price of some of these basic services to offset their increased costs.

Also if you add custom wheels on your vehicle, you need to put in new TPMS sensors if your originals won't work on the new rims. If you don't your TPMS light will be on constantly and you won't have the benefit of the warning system.

All in all, the mandated TPMS systems will save lives, so they're worth the added hassle and expense.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Timing Belt Service to Save Big Bucks in Idaho Falls

Your engine is like a finely choreographed dance. All the parts have to work together. If the timing is off at the ballet, dancers crash into each other and fall down. It the timing is off in your engine, it may not run at all. One of the most intricate dances in your engine has to do with the combustion cycle.

Your vehicle engine has cylinders in which a piston travels up and down. At the top of the cylinders are valves that open to bring in the air and fuel. And there are valves that open to let out the exhaust after the fuel has been burned.

Call All Things Automotive & Diesel Service at 208-523-3903 for answers about your timing belt, or drop by our Idaho Falls, ID, service center on 1997 Walton Ave #C.

It's critical that the values be timed to open and close at precisely the right time in the combustion cycle, or the engine will run poorly or not at all.

The timing belt is responsible for rotating the shafts that control the valves. It's vital and precision work. Timing belts are made of very tough, flexible material. They can last a long time. But they eventually wear out and can break. The consequences can be disastrous.

In some engines, the valves actually protrude far enough into the cylinders that they could come in contact with the piston. If the timing belt breaks, the pistons will smash into the valves. Valves get bent or broken. If the engine is spinning fast enough, the broken parts will shred the cylinder head as well. Repairing this damage can cost several thousand dollars.

It's a sad day when this happens; especially since it usually can be avoided. Manufacturers have issued recommendations for when you should replace your timing belt. For some engines, it's at 60,000 miles/97,000 km. For others it's at 90,000 miles/145,000 km or more. If you're approaching 60,000 miles/97,000 km or have passed it, make sure you check your owner's manual or with your Idaho Falls auto service advisor at All Things Automotive & Diesel Service for when the timing belt should be replaced. Don't let this one slip by.

Now some timing belts are visible and can be inspected. Others are hidden under a protective cover and are hard to get to. Some timing belts also drive the water pump. If you have a leaky water pump, the coolant will contaminate the timing belt and could make it fail sooner. So if you have this kind of engine, get it in to All Things Automotive & Diesel Service for an inspection right away if you have a coolant leak.

Most people in the Idaho Falls area with this engine design end up with a new timing belt when they replace the water pump. And when you're having your timing belt replaced on schedule, check with your All Things Automotive & Diesel Service auto service advisor to see if it makes sense to install a new water pump, even if it isn't currently having problems, since most of the labor is already being done any way for the timing belt replacement.

As a heads up; larger engines will often have metal timing chains rather than belts. The chains don't need to be replaced like belts.

We've already told you how very expensive it can be to get your car running again after a timing belt fails. You also need to know that replacing the timing belt is very labor intensive and is one of the most costly maintenance services you will have. So if you will be at the point where your timing belt should be replaced in the next year or so, ask for an estimate from All Things Automotive & Diesel Service in Idaho Falls, ID, so you can begin to prepare for the expense.

We at All Things Automotive & Diesel Service, your Idaho Falls service center, can be a valuable partner. Please take advantage of our knowledge and experience.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Using Proper Fluids in Your vehicle

Today, All Things Automotive & Diesel Service is writing about the proper fluids for your vehicle. It's become more complicated with changes in automotive design and manufacturing. It's not that people in Idaho Falls are confused as much as they don't realize how much things have changed in recent years.

If you have questions about the fluids in your vehicle, please don't hesitate to stop by All Things Automotive & Diesel Service. You can find us on 1997 Walton Ave #C in Idaho Falls, ID 83401.
Just give us a call at 208-523-3903.

Let's take engine oil. Twenty or 30 years ago, there were just a handful of different weights of oil. The weight of an oil is a scientific measure of its properties, particularly its viscosity or thickness.

It was common in those days to use a lighter weight oil in the winter when it's cold outside. That way the oil would be able to splash around inside the engine and protect the parts before it was fully warmed up. And a heavier weight oil would be used in the summer. The thicker oil wouldn't thin out too much in the summer heat and vaporize in the engine.

Modern valve trains have become very complicated with more moving parts and small passages than ever before. The valve train is in the top of the engine, so when the vehicle has been turned off for a while, the oil tends to run down to lower areas.  That means the valve train parts are vulnerable at start-up, before the oil starts circulating.

So new weights of oil have been introduced to meet the engineering specifications of these newer engines.

Manufacturers are recommending specific weights of oil. The recommendation is often printed on the oil fill cap. It's certainly in the owner's manual. Of course, All Things Automotive & Diesel Service in Idaho Falls can look it up for you.

It's more important than ever to have the correct weight of oil. The wrong weight could actually harm the engine.

Other fluids are also becoming more sophisticated. In the last few years new types of transmission, power brake fluid and coolant have all been introduced for some of the same reasons as for engine oil.

In addition, vehicle manufacturers are now using a wider variety of materials in these systems. Looking at the cooling system as an example, it used to be that the parts were all made out of steel or iron and the hoses were rubber. Now, some parts are plastic, aluminum or other materials.

So the anti-corrosion additives contained in the coolant, or anti-freeze, need to be different in order to protect the different materials used to make the cooling system. If you use the wrong coolant that wasn't formulated to protect your plastic cooling system parts, they could become corroded and fail. And if you're using the wrong coolant, your cooling system won't be covered under warranty. So it's important to use the right coolant and to not mix different types.

Your owner's manual or service advisor at All Things Automotive & Diesel Service can make sure you're using the right type. You may have heard of universal coolant. Universal, or global, coolant can be added to other types without harmful reactions. That's OK for an emergency top off, but following your manufacturer's recommendation for your vehicle or other auto type is always a safe bet.

In the area of brake fluid, there are a couple of new formulations. It's important to remember that the new ones aren't better than the old ones. They're just different formulations for different vehicles. So if your vehicle calls for DOT 3, using DOT 4 or DOT 5 is not an upgrade. Use the recommended formula.

There are fluid formulations for vehicles with higher mileage. These are special engine oil, transmission fluid and so on that contain additives to condition and restore seals and gaskets in older engines.

They're fine to use as long as they're a variant of the proper fluid. In other words you can use a high mileage engine oil as long as it's also the correct weight recommended by the manufacturer. Same goes for transmission fluid; as long as it's the right type for your transmission.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903