AUTONET TV

That Squeal is Telling You Something (What Causes Squealing While Steering)

If you hear a squealing noise when you turn your vehicle, it's trying to tell you something is wrong.  After all, it never made that noise before, right?  The sound  you hear may becoming from a few sources.  Let's take a look (or a listen) to some of the possibilities.

First, you almost certainly have power steering in your vehicle. Without power steering, you practically have to have arms like Arnold Schwarzenegger to turn, so automakers have technology to assist your steering, either mechanically or electrically.  For a long time, the most common power steering has been hydraulic, using a belt to supply power from the engine that turns a power steering pump full of a fluid that helps you steer. 

Sometimes that fluid gets low because of a leak or some other problem.  The belt could wear out and start squeaking, and you might feel the steering start to become harder.  Your service repair facility can figure out the problem and offer some solutions.

Another cause could be in your suspension.  Some components may not be getting lubricated like they should.  Or you may be hearing your tires squealing when you are turning. 

Properly working steering is a huge safety factor for your vehicle's operation.  Your steering affects handling, vital to your well-being as well as that of drivers around you.  So take your vehicle over to your repair facility and have it checked out.  You'll be doing everyone on the road—including yourself—a big favor by listening to your vehicle. When it comes to steering, silence really is golden.  Get that squealing repaired and get back to safe driving.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

The Key Won't Turn! (Ignition Problems)

You've just arrived at the store shopping and you're ready to head home.  You put your key in the ignition and… oh, no! The ignition won't turn! What do you do now?

Don't panic.  There are some things you can do to get going again.  The first thing to do is see if you have a locking steering wheel, an anti-theft feature that was introduced around 1970.  Sometimes it sticks.  Move the steering wheel side to side while you try to turn the key and you might be able to get it to release. 

Another thing to check is to see if your vehicle is in gear.  Most vehicles will only allow you to start the ignition if it's in park or neutral.  If you have an automatic transmission vehicle and it is in park, try jiggling the shift lever and try the key again.  Sometimes the safety mechanism doesn't properly make contact or gets a little sloppy. 

If both of these don't work, it could be your vehicle's battery is dead.  Some newer electronic systems require power so the key can turn. Others have alarm systems that detect if doors are open. 

Other issues that can cause key problems include something jammed in the lock cylinder.  Or some of the springs or pins inside may be stuck.  Consider that it may be the key itself.  Sometimes they get bent or simply wear out from the number of times they've been put in and taken out of the cylinder.

No matter what the cause, the first time this happens you should have your repair service facility check it out. That’s because if it happens once, it can happen again.  Even if you were able to get going again on your own, your ignition/key has warned you that something's wrong.  Have it checked out by a pro so you’re not locked into a bad situation.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Steer Clear of Power Steering Problems (Power Steering Maintenance)

We usually take our vehicle's easy steering for granted until something goes wrong.  Power steering is what makes it almost effortless to turn the steering wheel, aiming your vehicle in the direction you want to go. Without the assistance of power from the engine, steering would be a laborious process, so you want to make sure the system is working well.

Power steering systems are usually one of two types, hydraulic and electric.  The hydraulic type uses a pump that is driven by either a belt or an electric motor.  This system uses hydraulic fluid to create pressure that gives your steering the power assist.  Since that pump is always working, time and distance traveled eventually take their toll, and these systems need to be periodically inspected.  Also, while that hydraulic fluid can last for years, it should be replaced periodically as it degrades over time. Your vehicle's owner's manual contains the manufacturer's recommendations.

A technician can check for leaks in the hoses, pump housing or reservoir.  Also, the belts should be inspected and so should the pump, as these can fail.  Signs of a failing pump are a groaning noise when you turn the steering wheel, stiff steering, squealing noises when you first start your car and puddles of a reddish-brown fluid under your vehicle. 

The other type is called EPS, or electric power steering, which is becoming more commonly used in the latest vehicles.  It only delivers power assist when you need it and has an electric motor that supplies that steering help.  It's more efficient, accurate, compact and clean. And because it has a lot fewer components, it's easier to maintain. 

If you have electric power steering, you may notice sometimes it's hard to turn the wheel or your Check Engine light comes on.  Sometimes the power assist motor fails or there can be problems with electrical connections.  Any time you have symptoms, it's important for your safety and that of drivers around you that you have a technician check them out.

Properly working brakes are essential for the safe operation of any vehicle.  Stop! And make sure yours are working properly.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Weather Station on Wheels (Vehicle Sensor Maintenance)

You probably never thought about it, but your vehicle is like a rolling weather station.  It can check the outside temperature, let you know when the roads are slippery and help you deal with rain. And how it does all those things is pretty cool.

First, just like any weather station, a vehicle has sensors that measure the driving and weather conditions you find yourself in.  Some of those sensors can control computerized systems in your vehicle to react to the weather.  It depends on whether you have a 2-wheel, 4-wheel or all-wheel drive vehicle how those sensors will respond.

Let's start with temperature.  Most vehicles now have a thermometer that measures the temperature outside.  It's usually in the front, and likely will tell you on the instrument panel what the outside temperature measures.  But a temperature sensor will also tell your vehicle's computers to turn on or off certain systems like the heating or air conditioning.  If your ambient temperature sensor isn't working right, some symptoms are a malfunctioning automatic A/C or a temperature display that is way different than the app on your phone says it should be.

Your vehicle will also have sensors that measure your speed at each wheel.  They work with an onboard computer to measure slippage in any of the wheels so traction control and antilock brakes work correctly in case of slick roads.

Your vehicle can measure something called longitudinal and latitudinal acceleration, and it uses a yaw sensor to do it.  That helps it determine if you might be in an oversteering or understeering situation.  It's important because it works with your vehicle's brakes to apply stopping power to keep you in control.

A steering wheel sensor tells the vehicle's computers what the driver is doing with the wheel.  It also can work with those wheel sensors to measure how slippery the roads are, whether it be due to a wet (rain) or granular (gravel or sand) surface.  By sending different torque or braking to each wheel, it helps the driver maintain control.

More and more vehicles now have a rain sensor that can turn on the wipers automatically when they measure precipitation on the windshield.

So, you're driving your own weather station, and making sure all this data is coming in properly depends on how each component is working.  Regular service and maintenance on these systems is important to make sure they can do their job. Your rolling weather station can't predict the weather, but it can sure help you deal with it, so help it do its job right.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903